Broadcom LSI 9305-16i HBA/RAID card & Noctua fan is NOT included, only the shroud + screws are for sale!
If you want the shroud with fans included, please see my store page!
I cannot grantee fitment for counterfeit cards!
Please see the universal cooler on my store for compatibility with all genuine and counterfeit cards!
Details:
HBA cards do not include built-in fans because they are designed to be installed in server chassis with high-RPM system fans with directed airflow shrouds. When used outside of a server chassis, such as in a desktop PC, NAS, or homelab system, they may not receive enough airflow to stay within proper operating temperatures. My HBA coolers are designed to provide dedicated active airflow, keeping the card within spec and eliminating the risk of overheating, CRC errors, drive dropouts, and long-term component stress.
Compatible with 40mm fans, guaranteed fitment with Noctua NF-A4x10.
4 standard PC case fan screws included (M5 x 10 mm).
3D printed with polycarbonate (PC) plastic to withstand high heat environments without deforming.
1.75 slots are used (card + shroud + 10 mm fan).
Shroud fan screw holes are spaced 32 mm apart from the center of each hole.
Shroud fits snugly onto the cards PCB, some force is required to attach (see instructions below & video).
Instructions:
Place shroud over heatsink.
Clip on the 2 clips on the side with the PCIe slot first.
Apply lateral pressure at the top of the shroud, pushing the shroud towards the other side.
The remaining 2 clips will make an audible click when they engage over the PCB.
About:
Broadcom LSI 9305-16i HBA/RAID card & Noctua fan is NOT included, only the shroud + screws are for sale!
If you want the shroud with fans included, please see my store page!
I cannot grantee fitment for counterfeit cards!
Please see the universal cooler on my store for compatibility with all genuine and counterfeit cards!
Details:
HBA cards do not include built-in fans because they are designed to be installed in server chassis with high-RPM system fans with directed airflow shrouds. When used outside of a server chassis, such as in a desktop PC, NAS, or homelab system, they may not receive enough airflow to stay within proper operating temperatures. My HBA coolers are designed to provide dedicated active airflow, keeping the card within spec and eliminating the risk of overheating, CRC errors, drive dropouts, and long-term component stress.
Compatible with 40mm fans, guaranteed fitment with Noctua NF-A4x10.
4 standard PC case fan screws included (M5 x 10 mm).
3D printed with polycarbonate (PC) plastic to withstand high heat environments without deforming.
1.75 slots are used (card + shroud + 10 mm fan).
Shroud fan screw holes are spaced 32 mm apart from the center of each hole.
Shroud fits snugly onto the cards PCB, some force is required to attach (see instructions below & video).
Instructions:
Place shroud over heatsink.
Clip on the 2 clips on the side with the PCIe slot first.
Apply lateral pressure at the top of the shroud, pushing the shroud towards the other side.
The remaining 2 clips will make an audible click when they engage over the PCB.
About:
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5